- Isolation switches for input, output and battery
- Draw-out sub-assemblies and printed wiring boards
- Built-in test (BIT) capability
- On-line maintenance of batteries and battery charger
- Output voltmeter
- LED status indication for input, output, back-up mode operation, low battery, over current, over temperature and unit shutdown
- Fault signal for remote indication
- Circular coupling connectors for input and output
- Secondary fuse protection for output
|
 |
|
| Applicable Standards | MIL-STD-1399, Section 300 A, Type 1 / STANAG 1008 | | Voltage | 440 VAC nominal, 3 phase | | Frequency | 60 Hz nominal |
|
| Applicable Standards | STANAG 1008 |
|
| Voltage | 115 VAC single phase | | Frequency | 60 Hz | | Rating | 500 VA | | Battery Charging Time | 4 hours for 95% capacity |
|
| Operating Temperature | -30°C to +45°C/-22°F to +133°F | | Humidity | up to 95% RH non-condensing | | EMI/EMC | MIL-STD-461C, Part 5, Surface Ships | | Vibration | MIL-STD-167-1, Type 1, 5 Hz to 25 Hz | | Shock Resistance | MIL-S-901C, Type A, Grade A, Class 1 | | Airborne Noise | MIL-STD-740-1, Class B | | Cooling Method | Forced air convection |
|
| Dimensions (LxWxH inches) | 20.0 x 16.0 x 33.0 | | (LxWxH MM) | 508 x 406 x 838 | | Weight (max) | 300 lbs./136 kg |
|